Hereunder you find a glossary in english, german and dutch.

Particle size
Particle size of the mineral aggregate bound in the asphalt material; does not correspond to the Fragment size of the Milled material.
Performance class of cold milling machines
The machines are distinguished in terms of their working width, engine performance and weight.
Profile milling
This is a special application used to produce cross-sections with a special profile.
Special Milling drums enable special geometries, such as markings, water gutters, grooves (→ see “Milling grooves”) or cable ducts, to be produced including edges or radii.
Point-attack cutting tools
The actual milling operation is performed by Cutting tools&sprache=en" class="textlink">Point-attack Cutting tools fitted on the Milling drum of the cold milling machine. Their tips are subject to tremendous loads which is why they are manufactured from exceptionally wear-resistant carbide metal.
Cutting tools offering different properties are available for different types of application.
The tool shank is secured in the toolholder by means of a clamping sleeve, which enables free rotation of the cutting tool in the toolholder. The tool’s cutting performance is thus maintained, ensuring uniform wear and tear as well as an extended service life.
During the milling operation, extremely high temperatures are generated at the tool tip which must therefore be continuously cooled with water. The cooling water is additionally used to flush the clamping sleeves while supporting optimal tool rotation.